![Digitronic DIGISPEED DS1/V2 Скачать руководство пользователя страница 14](http://html1.mh-extra.com/html/digitronic/digispeed-ds1-v2/digispeed-ds1-v2_manual_2501171014.webp)
Digitronic
Digitaler Schaltbeschleuniger
Automationsanlagen GmbH
DIGISPEED DS1/V2
9. Dimensions
10. Technical Data
DisplayAnzeigen....................................................... 7 LED for status: 4x inputs, 1x state of service 2x
Supply voltage.......................................................... 24V DC ±20%, min. 5 Amp.
Current input ............................................................ max. 8A top-current in the moment of switching
Number of inputs...................................................... 4 programable inputs, galvanically separated 4
standard-programs
.................................................................................
Example:
2 switching inputs 2 inputs
whichdetermine the time-interval of the overload-
impulse.
Input voltage............................................................. active 16-30V DC, passive 0-3V DC
Input resistor ............................................................ 2,2k
Ω
-2,5k
Ω
Number of outputs ................................................... 2
Overload-impulse..................................................... 100V DC,
Note:
The overload in the device is de-established
during one minute after switching off the device.
Duration of the overload impulse ............................. may be programed.
Flywheel voltage....................................................... -56V DC.
Output voltage.......................................................... Supply voltage -1V at 1A permanent current.
(bei 24V DC min. 23V DC)
Output current .......................................................... 1A permanent current per output , resistant against
short circuits
Delay times .............................................................. max. 100µs
Recovery times ........................................................ see chapter recovery times
Cover........................................................................ hardly ignitable Thermoplast plastic, continous
temperature up to 100°C
Conductor allocation ................................................ five solid screw clamps up to 2,5mm² in the
structural module of 5,08mm; with labeling
Assembly.................................................................. comfortable snap-on assembly onto symmetrical
carrierer rail according to EN 50 022, row assembly
possible.
Disembly .................................................................. by pulling back the snap clip.
Dimensions .............................................................. see chapter "9. Dimensions"
Cover type................................................................ Cover corresponds with IP20.
Operating temperature............................................. 0° to + 55° C.
Weight
about 110g.
9. DimensionsCover type......................................... Cover corresponds with IP20.
Operating temperature............................................. 0° to + 55° C.
Weight...................................................................... about 110g.
Ausgabe: August 04
Seite: 14
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:[email protected]
Site web : www.hvssystem.com