Digitronic
Digitaler Schaltbeschleuniger
Automationsanlagen GmbH
DIGISPEED DS1/V2
5.1. The status LEDs
The DIGISPEED is equiped with 7 status LEDs, that light the terminal
allocation under the transparent sheet from behind. For every LED a specific
symbol was printed on the connection allocation.
Four LEDs show the actual status of the inputs. These are:
Inp.1
,
Inp. 2
,
Cfg.
1
and
Cfg. 2
.
Two more LEDs show the actual status of the outputs. These are:
Out. 1
and
Out. 2
.
The last LED named
Pow.
displays the devices status.
Device starts.
Status OK.
Error output 1
Error output 2
Error output 1+2
6. Recovery time for the DIGISPEED-DS2
The recovery time for the DIGISPEED-DS2 is needed for the continous recharging of the condenser to
create the overload amplifier impulse, since after every initiation of such a surge impulse, the
condenser has to recharge itself first. This means, that between two consecutive overload amplifier
impulses, you have to wait for at least the time given in the table below.
Current (mA) Ü-Zeit* 1 ms Ü-Zeit* 2 ms Ü-Zeit* 5 ms Ü-Zeit* 10 ms
100
4 ms
8 ms
20 ms
40 ms
200
8 ms
16 ms
40 ms
80 ms
300
12 ms
24 ms
60 ms
120 ms
400
16 ms
32 ms
80 ms
160 ms
500
20 ms
40 ms
100 ms
200 ms
600
24 ms
48 ms
120 ms
240 ms
700
28 ms
56 ms
140 ms
280 ms
800
32 ms
64 ms
160 ms
320 ms
900
36 ms
72 ms
180 ms
360 ms
1000
40 ms
80 ms
200 ms
400 ms
*Ü-Zeit: D
uration of the over-energizing impulse
Ausgabe: August 04
Seite: 12
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:[email protected]
Site web : www.hvssystem.com
