Digitronic
Digital Cam Switch Unit
Automationsanlagen GmbH
CamCon DC16
7.3.2. Program selection for programming
You reach the input of the output number by pressing the
key. You skip this by pressing the
key
and enter the program selection for the programming.
Enter the number of the desired program by using the numeric keys. Confirm your input with the
key.
A change in the program number does not lead to a change in the momentarily active cam
program. This means: You can program a program while another program operates the
outputs.
7.3.3. Programming the delay time/speed compensation
You reach the input of the output number by pressing the
key. You skip this by pressing the
key
and enter the delay time you want to compensate.
With the numeric keys you can enter the delay time that you need to compesate.
By pressing the
key while entering, the effects of the speed compensation for the switch-on- and
switch-off-point will be switched separately and the second delay time value can be fed in.
This seperated speed compensation can be deleted by pressing
while entering the second delay
time value.
Attention:
If the offswitchpoint overtakes the onswitchpoint at rising speed, the result will be a non-defined signal.
By pressing the
key with the input you can limit the effect of the delay time to the program you are
programming (private). A renewed pressing of the
key takes on the standard speed compensation
for this program.
Confirm your input by pressing the
key.
References to the way speed compensation works can be found in chapter "2.1. Speed
Compensation" on page 9.
Version: Aug. 04
Page: 32
