© 2014 Digitrax, Inc.
www.digitrax.com
— 6 —
Function Outputs on the DN166I0
The DN166I0 is set up at the factory to control six functions. The unit is prewired
with two golden-white LEDs set up for directional lighting as F0F/F0F+ for the
front light and F0R/F0R+ for the rear light. Functions F1 (Green), F2 (Violet), F3
(Brown) and F4 (White/Yellow) can be used by soldering a wire from the pad for
the function you wish to use to the lamp (or other function) you wish to control.
The wire colors indicated are the standard color code used in the industry (you
can use any color you like). These colors are important if you plan to use function
remapping.
All six function outputs can be easily set up with Digitrax FX3 lighting effects
or as standard on/off functions with the following operational qualifiers:
1. Forward or Reverse direction of travel, or
2. Whether F0 is on or off, or
3.
Both direction of travel and whether F0 is on or off, or
4. Whether the locomotive is stopped or moving.
Function Remapping
Function remapping allows you to program the function outputs of your decoder
to be controlled by selected function keys on your throttle. Please consult the
Digitrax Decoder Manual or website for information on function remapping.
Figure 4
: Function Outputs on Your DN166I0 (Top View)
Function 2
(Violet)
Function 1
(Green)
Function 3
(Brown)
Function 4
(White/Yellow)
Motor Contact
Slots
+Common
LED Leads
Leading to
Front Light
