Note: Before setting the parameters, please don’t connect any
load (whether it is heating / cooling equipment, or humidification /
dehumidification equipment).
For example
Turn on the heater at 76°F and turn off at 80°F, turn on the humidifier at
40% humidity and turn off at 50%.
1. Press and hold the SET button for about 3 seconds until the
appears.
2. Short press the SET button to select the temperature.
3. Press the and button to set the RV to 76°F.
4. Short press the SET button to the SV value page.
Long press SET
button for 3s
Run temperature
Stop temperature
Alarm low temperature
Alarm high temperature
Compressor Delay
time(mintures)
Temperature
Calibration
SET
SET
SET
SET
SET
SET
Long press SET
button to save
Run value
Stop value
Alarm high humidity
Alarm low humidity
Humidity Calibration
SET
SET
SET
SET
Long press SET
button to save
Setup Flow Chart
