3
Overload protection: 0.5A/250V, 10A/250V fuse.
[1] 10A for 15sec each 15min maximum.
2.2.4 AC Current (
AC+DC True RMS
)
[1]
Range
Accuracy ± ([% of Reading] + [Counts])
DC, 45Hz to 2kHz
400µA, 4000µA
2.0%+3
40mA, 400mA
2.0%+3
4A,10A
[2]
2.5%+3
Overload protection: 0.5A/250V, 10A/250V fuse.
[1] All ac ranges are specified from 1 % to 100 % of range. Below 5 % of range, add10 counts.
Because inputs below 1 % of range are not specified, it is normal for this and other true-rms
meters to display nonzero readings when the test leads are disconnected from a circuit or are
shorted together. For volts and amps, crest factor of ≤3 at 3000 counts, decreasing linearly to 2 at
full scale. AC volts and AC amps are dc-coupled.
[2] 10A for 15sec each 15min maximum.
2.2.5 Resistance
Overload protection: 250V DC or AC rms
。
2.2.6 Capacitance
Overload protection: 250V DC or AC rms
2.2.7 Diode and Audible continuity test
Range
Description
Test condition
Display read approximately
forward voltage of diode
Forward DC current approx. 0.4mA
.
Reversed DC voltage approx. 2.8V
Built-in buzzer sounds if
resistance is less than 100Ω
Open circuit voltage
approx. 0.5V
Overload protection: 250V DC or AC rms
2.2.8 Frequency
Range
Accuracy ± ([% of Reading] + [Counts])
10Hz~10MHz
± ( 0.1%+5 )
Sensitivity: sine wave 0.6V rms (10MHz: 1.5V rms)
Overload protection: 250V DC or AC rms
2.2.9 Duty cycle
0.1%
～
99.9%: ± ( 2.0%+2 ) Frequency lower than 10kHz
Sensitivity: sine wave 0.6V rms
Overload protection: 250V DC or AC rms
Range
Accuracy ± ([% of Reading] + [Counts])
400Ω,4kΩ,40kΩ, 400KΩ
，
4MΩ
1.0%+2
40MΩ
2.0%+3
Range
Accuracy ± ([% of Reading] + [Counts])
40nF
± ( 3.0%+10 )
400nF
，
4µF
± ( 2.5%+5 )
40µF
± ( 5.0%+10 )
400µF
，
4000µF
± ( 20.0%+20)
