background image

C

C

ongratulations, and thank you for your purchase of the Digitech XP-300 Space Station. The XP-300

offers not one, not two, but numerous effects in one compact heavy duty pedal chassis design. With the XP-
300, you get out of this world effects including: Resonators, Ring Modulators, Arpeggiator, AutoWhammy
Reverse Effects and more. In addition, the XP-300 also provides you with a Volume controller and a
Chromatic tuner. This owner’s guide is provided to get you up and going with the XP-300 and use it to its
full potential. 

Front and Rear Panel Controls and Functions 

1

.    

Signal LED 

- Indicates that signal is entering the XP-300.

2.    

Clip LED 

- Indicates that signal is clipping in the XP-300.

3. 

Status Display 

- The Status Display window shows the current information including: bypass, current

effect program number, and Chromatic Tuner information. When the XP-300 is in Program mode
(Factory or User), the display will either read:

1-40

(Factory) or

U1-U6

(User).

*Note-

A complete listing of all Factory programs is located on the bottom panel of the XP-300.

4.    

Program UP/(Hold)DOWN Switch 

- Lets you select programs. Pressing once will move up through the

program menu. Press and hold and the XP-300 will move down through the program menu.

5.    

BYPASS/(Hold)TUNER Switch 

- Puts the unit into Bypass by pressing the footswitch once. To select the

Tuner, press and hold the footswitch until the display reads: tu, indicating that you are in Tuner mode.

6.    

Expression Pedal 

- Controls the selected effect or volume.

7.    

Input Level Control 

- Sets the amount of signal being sent into the unit. The ideal setting for the input

control of the XP-300 is to set the input level at a point where the Clip LED indicator occassionally
lights.

8.   

Input Jack 

- Connect instrument here using 1/4” guitar cord.

9.   

Left (Mono) Output

- This is the Left (Mono) output of the XP-300. It can be used alone or together with

the Right output to produce stereo imaging effects.

10. 

Right Output

- This is the Right output of the XP-300.

1

4

5

2

3

6

7

8

9

10

12

11

Содержание XP300

Страница 1: ...fer to replacement text on the unit for correct fuse type WARRANTY 1 The warranty card must be mailed within ten days after purchase date to validate this warranty 2 DigiTech warrants this product when used solely within the U S to be free from defects in materials and workmanship under normal use and service 3 DigiTech liability under this warranty is limited to repairing or replacing defective m...

Страница 2: ...display will either read 1 40 Factory or U1 U6 User Note A complete listing of all Factory programs is located on the bottom panel of the XP 300 4 Program UP Hold DOWN Switch Lets you select programs Pressing once will move up through the program menu Press and hold and the XP 300 will move down through the program menu 5 BYPASS Hold TUNER Switch Puts the unit into Bypass by pressing the footswitc...

Страница 3: ...k the pedal forward and press a foot switch The expression pedal is now calibrated If the pedal did not calibrate properly the display will read Er in which case you need to repeat this procedure again 12 AC Line Input Connect the power adpater here Use only the enclosed PS 750 power supply Tuner Mode To access the Tuner mode press and hold the BYPASS Hold TUNER footswitch until tu appears in the ...

Страница 4: ...55020 1991 Supplementary Information The product herewith complies with the requirements of the Low Voltage Directive 73 23 EEC and the EMC Directive 89 336 EEC as amended by directive 93 68 EEC Digitech President of Digitech 8760 S Sandy Parkway Sandy Utah 84070 USA Effective 2 17 98 European Contact Your Local Digitech Sales and Service Office or International Sales Office 3 Overlook Drive 4 Amh...

Отзывы: