background image

DECLARATION OF CONFORMITY

Manufacturer’s Name: 

DigiTech 

Manufacturer’s Address: 

59 Hwagok-ro 61gil, Gangseo-gu

 

Seoul 07590, Republic of Korea

declares that the product: 

Product name: 

Whammy DT

Product option: 

all (requires Class II power adapter that    

 

 

 

conforms to the requirements of EN60065, 

 

 

 

 

EN60742, or equivalent.)

conforms to the following Product Specifications:

Safety:  

 

IEC 60065 -01+Amd 1

EMC:   

 

EN 55022:2006

 

 

 

EN 55024:1998

 

 

 

FCC Part 15

Supplementary Information:

The product herewith complies with the requirements of the:
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC.
RoHS Directive 2002/95/EC
WEEE Directive 2002/96/EC 
EC Regulation 278/2009

With regard to Directive 2005/32/EC and EC Regulation  

 

1275/2008 of 17 December 2008, this product is designed, 

 

 

produced, and classified as Professional Audio Equipment and 

 

 

thus is exempt from this Directive.

 

 

     

Contact: Your local DigiTech Sales and Service Office or

CORTEK Corp.
59 Hwagok-ro 61gil, Gangseo-gu
Seoul 07590, Republic of Korea
[email protected]

Warning

For your protection, please read the following:

Important Safety Instructions
 1. Read these instructions.
 2. Keep these instructions.
 3. Heed all warnings.
 4. Do not use this apparatus near water.

 5. Clean only with dry cloth.
 6.  Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions. 

 7.  Do not install near any heat sources such as radiators, 

heat registers, stoves, or other apparatus (including 

amplifiers) that produce heat.

 8.  Protect the power cord from being walked on or 

pinched particularly at plugs, convenience receptacles, 

and the point where they exit from the apparatus.

 9.  Unplug this apparatus during lightning storms or when 

unused for long periods of time.

10.  No user serviceable parts inside. Refer all servicing to 

qualified service personnel. Servicing is required when 

the apparatus has been damaged in any way, such as 

power-supply cord or plug is damaged, liquid has been 
spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

11.  WARNING: To reduce the risk of fire or electric 

shock, do not expose this apparatus to rain or 
moisture.

12.  Refer to labels on the unit, including bottom cover, or 

other markings and pertinent information.

Содержание Whammy DT

























Отзывы: