DigiTech VOCALIST LIVE PRO, Руководство пользователя

Страница: 27 / 68

21 VL.Pro.Owner’s.Manual
The.Global.I/O.Setup.Menu
The.Global.I/O.Setup.Menu
There are 3 stereo outputs on the Vocalist® Live Pro that can support up to 2 unique mixes
simultaneously. The physical outputs are MAIN, AUX and S/PDIF. The MAIN and S/PDIF outputs
always carry the same output signals in the corresponding analog or digital format.
These outputs can be assigned to carry different audio signals to make individual channel processing
or sub-mixing possible. The output modes for the MAIN/S/PDIF and AUX outputs are as listed below
in the Output Mode menu.
For a depiction of the signal flow for each of the three Output Modes, see the Output Mode Signal
Flow diagrams in the Block Diagrams section of page 52.
As well the output configuration options, The Global I/O setup menu allows setting the functionality
of the foostwitch buttons and the guitar sensitivity. See the chart below for descriptions of the
individual menu items.
Output Mode
Aux =
Main
In this mode, the Main Output carries a mix of the Lead and
Harmony Vocals and Effects. The Aux Output is simply a copy of
the Main Output. This is the default mode of operation.
Main,
Aux
Separate
In this mode, the Main Output reflects the mix controlled by the
front panel level knobs. The Aux Output carries a mix of lead
and harmony controlled by level settings in the I/O Setup Menu.
This allows the possibility of adjusting the levels so that the Main
Out contains only the Lead and the Aux Out contains only the
Harmony, or visa versa. It also provides the flexibility of having
a separate mix for the Main Out or Aux Out to connect to the
monitor, while the other output is connected to the PA.
V1+V2
V3+V4
In this mode, the output carries the four separate harmony
voices – Voice 1 = Main Out L, Voice 2 = Main Out R, Voice
3 = Aux Out L and Voice 4 = Aux Out R. No Post Effects are
applied to the 4 harmony voices in this mode. This mode is use-
ful as the harmony parts can be mixed or recorded individually
using external processing equipment.
Aux Lead
Level
This option is only available when the Output Mode is Main, Aux Separate.
It sets the Lead Vocal Level for the Aux Outputs.
Range: Off and -60dB to +0dB
Aux HRM
Level
This option is only available when the Output Mode is Main, Aux Separate.
It sets the Harmony Voices Level for the Aux Outputs.
Range: Off and -60dB to +0dB
Main Out
Mono Sets the Left and Right Main Outputs to Mono Output.
Stereo Sets the Left and Right Main Outputs to Stereo Output.
Table Continued Next Page