DigiTech VOCALIST LIVE 4, Руководство пользователя

Страница: 29 / 38

23
Utility Parameters
The Utility parameters are accessed by simultaneously pressing the
Edit Up/Down
arrow keys
in the Effects Matrix . The main display will show
UTILity
and the Numeric Display flashes
U
.
Once this occurs, each knob controls the value of a particular system parameter, as shown below.
FX Foot-
switch
Control
FXFS all
FXFS most
FXFS -DIS
FXFS -CMP
FXFS -EQ
FXFS -RVB
1
2
3
4
5
6
When the Effects LED is off:
All effects are disabled: Preamp, Comp/Gate, EQ, Pitch
Correction, Lead Effects, Reverberation, Delay, and
Guitar Mix.
All vocal effects are disabled except reverb, comp/gate and EQ.
All vocal effects are disabled except distortion.
All vocal effects are disabled except compression.
All vocal effects are disabled except EQ.
All vocal effects are disabled except reverb.
Harmony
Foot-
switch
Control
HARMFS TOG
HARMFS MOM 1
2
Harmony toggles on and off when you hit the footswitch.
Harmony comes on only when you hit the footswitch
and then goes off as soon as you release the footswitch.
Guitar
Sensitivity
GTRSENS LO
GTRSENS HI
1
2
Low guitar sensitivity - used for most guitars.
High guitar sensitivity - used for older guitars with weak
output levels.
Expression
Pedal
Controls
1 EP=NONE
Expression
pedal is
disabled
13 EP=MOD SPD
Voice Mod
Speed
2 EP=HRM LVL
Harmony
Level
14 EP=HRM BAL
Harmony
Balance
3 EP=GTR LVL
Guitar Level
15 EP=RVB lvl
Reverb Level
4 EP=PREGAIN
Pre-amp Gain
16 EP=RVB DCY
Reverb Decay
5 EP=BND RES
Band
Resonance
17 EP=dly lvl
Delay Level
6 EP=BND CEN
Band Center
18 EP=dly DMP
Delay Damping
7 EP=BASS
Bass
19 EP=dly tim
Delay Time
8 EP=MIDGAIN
Mid Gain
20 EP=dly fbk
Delay Feedback
9 EP=TREBLE
Treble
21 EP=GTR RVB
Guitar Reverb
Amount
10 EP=PC AMT
Pitch Correct
Amount
22 EP=GMOD AM
Guitar Mod
Amount
11 EP=PER AMT
Persona
amount
23 EP=GMOD SP
Guitar Mod
Speed
12 EP=MOD AMT
Voice Mod
Amount
24 EP=GMOD FB
Guitar Mod
Feedback
Note : The settings for FX Footswitch Control, Harmony Footswitch Control and Guitar Sensi-
tivity apply to ALL presets. The setting for the Expression Pedal Control applies to the current
preset only. If you modify the Expression Pedal setting and wish to store it you must Store the
preset (see page ). When you load another preset, its setting for Expression Pedal Control
will take effect.