26
TREMOLOS / AUTO PANNERS
Tremolos and Auto Panners are similar to one another because they use
an LFO to modulate the level of the signal. This allows you to re-create the
tremolo effects commonly found on vintage instrument amplifiers.
PITCH SHIFTERS / DETUNERS
Pitch shifters allow you to create multiple voices from a single note input.
In the Studio Quad, the new pitch is determined by the setting of the
SHFT Parameters, which can cover a pitch range of four octaves.
Detuners are similar to pitch shifters, but the intervals between the
detuned signal and the original are much smaller, usually expressed in
cents (hundredths of a semitone). The Studio Quad uses percentages of
semitones to express the shifted note's distance from the original. For
example, with a maximum detune setting of 50%, the pitch is exactly one
semitone (50 cents) up from the original.
✓
✓
✓
✓
✓
✓
✓
✓
Auto Panner
Tremolo
FX Lvl
Controls the signal input level fed to the Module. Varies from OFF to 100%.
Speed
Controls the oscillation speed of the effect. Range of this control is from 0 to 100 Hz.
Depth
Adjusts the intensity of the effect. As DEPTH increases, volume changes becom more dramatic.
Varies from. 0 to 100%. You can create subtle animation effects using an Auto Panner and setting this
control low.
WvFrm
Selects which waveform the LFO follows. Options for this control include sine, triangle, SP1 (Special 1),
and SP2 (Special 2). The Triangle Waveform setting produces a classic tremolo effect.
PARAM.
DESCRIPTION
Tremolo / Auto Panner
Section 3 - Effects and Parameters
Studio Quad Owner's Manual
