The RP-3 also offers Intelligent Harmony Pitch Shifting that lets you select the key, scale and amount of shifting in the signal. The
parameters are as follows:
Type
This parameter lets you select the scale that the Harmony effect uses. There are six different scales and
they are numbered as follows:
H1
- Major,
H2
- Minor,
H3
- Harmonic Minor,
H4
- Dorian,
H5
-
Mixolydian, and
H6
- Blues.
Amount
Amount lets you select how much the pitch is shifted. This Ranges from: Octave down-Octave Up
Key/Bend
This parameter lets you select which key the harmony shifting takes place in. This ranges from: A
b
to G.
Note:
The reverb and Wah effects are not available when the Harmony effect is selected. For complete reference guide to these
scales, please refer to the Harmony interval charts located in the Appendix section on page 18.
Delay Parameters are as follows:
Delay
Turns the Delay on and off.
Type
Determines the type of delay. Type 1 is a mono delay and Type 2 is a ping pong delay.
Level
Controls the level of the delay. 2. Ranges from 0 to 99.
Delay Time
The available delay time ranges are 1 (no delay) to 3.5 seconds.
Feedback
The number of delay repeats. Ranges from 0 to 99 and rh (repeat/hold).
Delay
Parameters
Displayed Values
On/Off
Type
Level
O n - B y
1 . . . 2
0 . . . 9 9
Delay Time
1 . . . 3 5
.
Feedback
0 . . . 9 9 . . . r h
H1-H6
(Harmony)
Values
Displayed Values
Type
H 1 . . H 6
Amount
O d . . . O u
Key/Bend
a b . . . G #
RP-3
User Guide
Section - 4 Effects and Parameters
15
Содержание RP 3
Страница 6: ...RP 3 User Guide IV ...
