JEWELRY Mode. It simply indicates that the discrimination pattern is optimized
for locating most jewelry items. The JEWELRY mode will still find coins, relics and
other non-jewelry items. It ignores most nails and small iron pieces automatically.
OPERATION
Step 1. Turning on the detector
Press
POWER button to turn on the detector.
After about 2 seconds the detector enters into stand-by state. LCD displays four
modes indicator, SENS level, and battery level.
Note: If no button is pressed or no target is detected within about 15 minutes,
the detector will turn off automatically.
Step 2. Testing and using the detector
To learn how the detector reacts to different metals, you should test it before
you use it the first time. You can test the detector indoors and outdoors.
Indoor Testing and Use
1.
Press power button to turn on the detector.
2. Setting the operation mode
(1) A-M (ALL METAL) mode:
Press MODE to select
A-M (ALL METAL) mode. A-M is displayed on LCD. This
means ALL METAL mode is selected. You can detect all kinds of metal.
(2) DISC (DISCRIMINATION) Mode
