background image

DecLaratIon of

conforMIty

manufacturer’s Name: 

harman music Group

manufacturer’s Address: 

8760 s. sandy parkway

 

 

  

sandy, utah 84070, usA

declares that the product:

 

product name: 

Jamman delay

 

product option: 

all (requires class ii power    

 

 

  

adapter that conforms

 

 

  

to the requirements of  

 

 

 

  

eN60065, eN60742, or  

 

 

 

  

equivalent.)

conforms to the following product specifications:

 

safety:   iec 60065 -01+Amd 1

 

emc:   eN 55022:2006

 

 

 eN 55024:1998

 

 

 Fcc part 15

supplementary information:

the product herewith complies with the requirements of the:

Low Voltage directive 2006/95/ec

emc directive 2004/108/ec.

rohs directive 2002/95/ec

Weee directive 2002/96/ec 

With regard to directive 2005/32/ec and ec regulation 

1275/2008 of 17 december 2008, this product is designed, 

produced, and classified as professional Audio equipment and 

thus is exempt from this directive.

 

 

With regard to directive 2005/32/ec and ec regulation 

278/2009 of 6 April 2009, this regulation applies to class 

A (single output) external power supplies. the external power 

supply used with this product is a multi-output power supply and 

thus is exempt from this directive. 

 

 

 

Vice-president of engineering          

        

 

 

8760 s. sandy parkway 

 

 

 

 

sandy, utah 84070, usA

 

 

date: April 7, 2010

european contact:  Your local digitech sales and service office or

 

 

harman music Group

 

 

8760 south sandy parkway

 

 

sandy, utah  84070,  usA

 

 

ph: (801) 566-8800

 

 

Fax: (801) 568-7583

eLectroMaGnetIc

coMPatIBILIty 

this device complies with part 15 of the Fcc rules and 
the product specifications noted on the 

Declaration of 

Conformity

. operation is subject to the following two 

conditions:

 this device may not cause harmful 

• 

interference, and 
 this device must accept any interference received, including 

• 

interference that may cause undesired operation.  

operation of this unit within significant 
electromagnetic fields should be avoided.

use only shielded interconnecting cables.

• 

u.K. MaInS PLuG WarnInG

A molded mains plug that has been cut off from the cord is 
unsafe. discard the mains plug at a suitable disposal facility.

NEVER UNDER ANY CIRCUMSTANCES SHOULD 
YOU INSERT A DAMAGED OR CUT MAINS 
PLUG INTO A 13 AMP POWER SOCKET.

do not use the mains plug without the fuse cover in place.  
replacement fuse covers can be obtained from your local 
retailer.  replacement fuses are 13 amps and must be 
AstA approved to Bs1362.

If you want to dispose this product, do not mix it with general household waste.  There is a 
separate collection system for used electronic products in accordance with legislation that 
requires proper treatment, recovery and recycling.

Private household in the 25 member states of the EU, in Switzerland and Norway may return their used 
electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar 
new one).
For Countries not mentioned above, please contact your local authorities for a correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and 
recycling and thus prevent potential negative effects on the environment and human health.

IMPORTANT SAFETY INFORMATION

Содержание JAMMAN - REV 18-0687

















































































Отзывы: