DigiTech JAMMAN - MANUAL 2, Руководство пользователя

Страница: 42 / 68

38
Anytime a change is made to a loop memory location (Rhythm Type, Tempo,
Time Signature, Record, Overdubs etc.) the
stoRe
button will immediately
light. This indicates that the changes will be lost unless a store procedure
is performed before selecting a new loop memory location, turning off the
power.
Store Changes to a Loop
Stop any recording activity using the 1.
teMPo/stoP
footswitch.
Press the 2.
stoRe
button. The
stoRe
button and the
DIsPLaY
will begin
to flash (the
DIsPLaY
shows the current loop memory location).
(Optional) Turn the 3.
seLect
knob to select an empty loop memory
location to store the loop with its changes (the
LooP
or
sINgLe
LEDs
are off), or press
eXIt
to abort.
Press the 4.
stoRe
button again. The changes are now saved and the
stoRe
button turns off.
Copy a Loop to a Different Memory Location
Stop any playback or record activity using the 1.
teMPo/stoP
footswitch.
Turn the 2.
seLect
knob to select a memory location that contains a
loop (either the
LooP
or
sINgLe
LED is lit).
Press the 3.
stoRe
button. The
DIsPLaY
and the
stoRe
button will begin
to flash.
Turn the 4.
seLect
knob until an empty memory location is selected
(the
LooP
and
sINgLe
LEDs are off), or press
eXIt
to abort.
Press the 5.
stoRe
button again. The loop is now copied to the new
memory location.
Note: The Clear and Overdub Undo/Redo functions cannot be performed
to the loop after a Store/Copy procedure.
Storing/Copying Phrases