34
Recording a Loop - Aux Input
The JamMan
®
Stereo can record directly from an MP3 or CD player. This
feature is useful for learning and practicing new songs as well as creating backing
tracks. You should have an audio source connected to the AUX INPUT before
proceeding.
Select an empty memory location using the
1.
seLect
knob or
LooP UP/LooP
DoWN
footswitches (the
LooP
and
sINgLe
LEDs will be off).
Press the
2.
RecoRD MoDe
button and choose one of four
aUX INPUt
modes:
a.
aUX INPUt
only lit: The unit will record the program material just as it
comes from the source.
b.
aUX INPUt
and
ceNteR -
lit: Audio will be summed to mono and any
material that is common to both stereo channels (usually lead vocals
or instruments) will be removed from the recording. Any stereo
processing of the center channel (reverb, for instance) might not be
removed completely.
c.
aUX INPUt
and
fULL RaNge aMP
lit: The program material will be
recorded in stereo with an equalization curve so that when it is played
through a guitar amp it will more closely retain its original frequency response.
d.
aUX INPUt
,
ceNteR -
, and
fULL RaNge aMP
lit: Audio will be
summed to mono and remove center channel material and apply a
compensating equalization as in the two previous modes.
(Optional) Set the Time Signature to something other than 4/4, if desired.
3.
(See page 40 for more information about Time Signatures.)
(Optional) Turn the
4.
aUto Rec
button on if you want the JamMan Stereo to
begin recording when the audio source begins playback
Play back the audio source and set its output level so that the
5.
PeaK
LED
lights green and yellow but doesn’t light red.
Press the
6.
Rec/PLaY/oVeRDUb
footswitch to start recording. This footswitch
and the
RecoRD
status LED will light solid red and recording will begin. If
Auto Record is enabled, the
Rec/PLaY/oVeRDUb
and
RecoRD
status LED will
flash red after the footswitch is pressed indicating it is armed for recording.
Recording will automatically begin once the audio source starts playing.
When you are finished, press either the
7.
Rec/PLaY/oVeRDUb
footswitch
to have the phrase play back in a repeating loop or press the
teMPo/stoP
footswitch to stop recording.
Once you are finished recording, the
stoRe
button will be lit indicating the phrase
must be stored to memory to be recalled later (see the Storing/Copying Phrases
section on page 38).
Содержание JAMMAN - MANUAL 2
