Stereo Spectrum Selection
In addition to having the two stereo
output modes (Mode 2 and Mode 3),
the DF-7 also has six different stereo
spectrums to choose from when using
Mode 2 or Mode 3.To activate the
stereo spectrums, follow the steps in
the
Stereo Spectrum Setup
sec-
tion and choose a stereo spectrum
with the
DISTORTION MODEL
knob.
Note:
The DF-7 must be in Mode 2
or Mode 3 to activate Stereo
Spectrum Mode. Changes made to
Flexible Output Mode and Stereo
Spectrum are saved even after the DF-
7 is turned off. Mode One does not
utilize Stereo Spectrum.
Stereo Spectrum Set-Up:
1. Press and hold the Pedal Switch for
5 seconds.The Indicator LED will
flash twice if the DF-7 is in Mode 2,
or three times if the DF-7 is in
Mode 3.
2.While the indicator LED is flashing,
turn the
DISTORTION MODEL
knob to select a Stereo Spectrum.
Setting 1 is no spectrum; setting 2 is
the narrowest spectrum; settings 3-6
are progressively wider; setting 7 is
the widest spectrum.
3. Once you’ve selected a spectrum,
press the Pedal Switch.The Indicator
LED will stop flashing and the spec
trum will be active.
4. Select the desired Distortion Model
with the
DISTORTION MODEL
knob.
Содержание Distortion Factory DF-7
Страница 1: ......
