DigitaLinx DL-HDM44-FS, Инструкция по установке и эксплуатации

Страница: 24 / 28

DL-HDM44-FS Installation Guide
24
Technical Specifications
Input/Output Connections
HDMI Inputs Four (4) HDMI Type A Receptacle
HDMI Outputs
Four (4) HDMI Type A Receptacle
Analog Audio Outputs
Four (4) 3-Pole/3.5mm Euroblock
IR extension
One (1) 3.5mm TRS
TCP/IP
One (1) 8P8C Port (Shielded RJ45 Female)
RS232 One (1) 3-pin Removable Terminal Block Connector
Power One (1) IEC C14
Supported Audio, Video, and Embedded Control
Video Resolutions
VESA:
640x480@60Hz,800x600@60Hz, 1024x768@60Hz, 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz,
1360x768@60Hz, 1366x768@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1200@60Hz,
SMPTE:
720x480@60Hz,720x576@60Hz, 1280x720@50/60Hz, 1920x1080@50/60Hz, 3840x2160@24/25/30Hz
Deep Color
1080p 36bit / 4K 24bit
Maximum Passive HDMI Cable Distance 5 m (16.4 ft)
Video Compliance HDMI1.4 / HDCP2.2 only for inputs
Audio Format Supported
Multi-channel digital audio, PCM2.0 and Dolby5.1., 2-CH stereo audio de-embedded
Embedded RS232 Baud Rate
57600 baud
Device Control Parameters
IR Carrier Frequency Range 33-55kHz at 5 volts
Ethernet 100BaseT
RS232 Baud Rate
57600 baud
Chassis and Environmental
Enclosure Painted Aluminum
Dimensions (H x W x D) 43 mm x 437 mm x 326 mm (1.69 in x 17.20 in x 12.83 in) – 1 RU
Shipping Weight 4.86kg (10.71 lbs.)
Operating Temperature
0° to +45° C (+32° to +113° F)
Operating Humidity
10% to 90%, Non-condensing
Storage Temperature
-20° to +70° C ( -4° to +140° F)
Storage Humidity
10% to 90%, Non-condensing
Power, ESD, and Regulatory
Power Supply 100V-240VAC / 50-60 Hz
Power Consumption 75W(Max.)
ESD Protection 8kV air, 4kV contact
Product Regulatory FCC, CE, RoHS
Other
Standard Warranty 2 years
Diagnostic Indicators System LCD
Included Accessories Installation Guide, IR Remote, IR Receiver, Rack Mounting Ears with Screws, US Power Cable, USB to UART Cable, (8) 3.5mm 3pin
Phoenix
Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches.