Installation Notes
1. Avoid sheltering or covering camera's light sensor;
2. Protect camera from direct sunshine;
3. Ensure correct wiring otherwise device can't work normally.
Package List
1~3×indoor monitor, 1×outdoor unit, 1×user manual, 1×warranty card, 1×quality
certificate, 2×DC5V/1A charger, 1×install screws package, 2~4×lithium battery (EB-
1G6LLU)
Statement
This product max supports one camera with 3 monitors. Pairing is finished before
delivery and it can directly used.
Installation Guide
Outdoor camera should be installed 1.4-1.7 meter above floor and avoided direct sunshine.
Installation Instruction
1. Punch suitable holes on wall, put screw stopper and fix rain cover on the wall with
screws;
2. Connect charge cable (hole diameter 16-30mm) as per wire connecting diagram. In case
of indoor charge, pierce power cable out of wall hole; Make cable out of rain cover bottom
and connect wire for outdoor charge.
3. Fix rechargeable lithium battery (EB-1G6LLU) on outdoor camera; unit auto boots.
4. As above image shows, put outdoor camera from the top into rain shield, then push
camera bottom and confirm its top tightly in shield. Secure camera bottom with matching
screws and install screw cap.
3. Charger's Operation and Precautions
This product can be charged with charger or computer through USB cable
connection.
Please charge product with original charger; other voltage will result in leakage, fire
or other damage.
No short circuit charging, otherwise charge will be damaged; or electric shock and
smoke will occur.
Never charge when power cable is damaged to avoid fire or electric shock.
Regularly clear power socket's dust away.
Do not put charger next to water container to prevent overheat, or short circuit and
