DD-5100
defined below:
[1.tAG]
>
>
[5.dEL]
>
>
[5.ALL]
>
>
[dEL?]
>
>
[donE]
– all identificators are
deleted
Delete system identificator, related to sequence number
Similar to user tags, system tags has it's own sequence numbers from range [1-6]. For example to delete last
sixth system tag, do the following:
[1.tAG]
>
>
[4.dEL]
>
>
[3.S.onE]
>
>
[S.- ]
> (enter no.=6) >
>
[donE]
–
identificator deleted
Delete common identificator, related to sequence number
Similar to user tags, Common tags has it's own sequence numbers from range [1-16]. For example to delete
last sixth system tag, do the following:
[1.tAG]
>
>
[5.dEL]
>
>
[3.C.onE]
>
>
[C.- ]
> (enter no.=16) >
>
[donE]
–
identificator deleted
4.3.2. Actions with codes
Door phone DD-5100 does not contain door unlock codes generated and entered to memory in advance.
Each user has a possibility to create and change his door unlock code, using user’s programming li nk (See User’s
Manual. Page 25). No one, including system installing personnel, does not know a code in advance, which helps to
increase a level of system safety. However, upon a necessity, system adjuster or administrator has a possibility to
deliver, change or delete System user’s or Service codes. See fig. 16 for “Actions with codes” menu item structure:
Set/change users door unlock code
System administrator can enter a new or change an old user’s door unlock code. Administrator’s rights allow
to change the mentioned code even without a previous one. Delivery of a new code and change or an old one are
performed according to similar procedure: enter an appropriate subscriber’s ID and enter a new code. See an
example of changing door unlock code for a flat No. 56:
[2.CodE]
>
>
[1.U.Pin]
>
>
[Id- ]
> (enter ID=56) >
>
[_ _ _ _]
> (set new code) >
>
[donE]
– door unlock code for a flat No. 56 is entered/changed
Change Service PIN (SPIN) code
SPIN code allows to enter a system programming mode and is delivered one time when activating this mode.
SPIN code could be changed using programming menu:
[2.CodE]
>
>
[2.S.Pin]
>
>
[_ _ _ _]
> (enter new SPIN code) >
>
[donE]
– SPIN
code is changed
Delete All PIN codes except S.Pin
This function allows you to delete all entered user and the administrator PIN code.
[2.CodE]
>
>
[3.rESEt-ALL]
>
>
[rSt?]
>
>
[donE]
4.3.3. System settings
This menu item allows to arrange the main system settings: to change unlock delay time, lock type, access
control type and number of calling signals ( See fig. 18).
24
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
Fig. 16: Structural scheme of code programming menu
[2.CodE]
– action with codes
[1.U.Pin]
- set/change users door unlock code
ENTER
ENTER
ENTER
ENTER
ENTER
[2.S.Pin]
- change Service PIN (SPIN) code
[3.C.Pin]
- change Common PIN (CPIN) code
[3.rESEt-ALL]
- Delete All PIN codes except S.Pin
ENTER
ENTER
ENTER
