7
7.1 Assemble the Mortise
Assemble the mortise( ) into the slot which
is drilled according to the template(45/85 Mortise).
c
7.2 Assemble the Front Panel
Fix the front panel(
a
) on the door and cross the cable
through the hole.
7.3 Connect the Cable
Insert the 70L spindle on mortise, cross the cable
through the hole and connect with the PCB board.
7.4 Fix the Lock Panel
Tight the back panel with front panel with the
two long screws.
a
7.5 Assemble the Battery Box
Put 4pcs AA alkaline batteries and fix the
battery box cover.
7.8 Adjust the Lock Panel
After finishing installation, please adjust the
position of the lock panel or the screws whether
it is too tight.Test with password: 123456 and
turn the manual key and then press the handle
to open.
5
6
b
INSTALL THE LOCK
2
1
3
h
f
g
OPERATION STEPS
3sec
Press *39 #123456#2#
Change
to
English
voice
tip
Press the reset button and hold 3 seconds
Please input initialization passcode,
enter: 000#, with sound : “Successful”
Please enroll the administrator before you start to use this lock. you can follow the operation
steps as below:
1.Initialization
2.Change Language
000#
2.Enroll Mobile Administrator
Factory
state
:
Default
master
passcode
is:123456.
or
Press *39 #123456#1#
Change
to
Chinese
voice
tip
Touch screen, light on
Voice
tip:”please add Bluetooth administrator”.
2.1 Factory state: press *12#123456#new passcode#new passcode#.
2.2 You can use the mobile APP to add the Bluetooth administrator.
When adding the door locks, operations must be completed near the lock.
Step 1: Click “+” button
Step 2: Select the lock
Step 3: Click the device name
A260BLE_0163bd
Содержание A260 TTLOCK
Страница 7: ......
