DIGITAL YACHT iKConnect Скачать руководство пользователя страница 3

Installation Step 1 

Siting of the iKConnect is critical for Wi-Fi reception. The unit features a 3dB antenna which should give up to
30m range but it is important that the unit is sited in a central location within the boat to try and ensure that Wi-Fi
reception is good in all areas of the boat.

If the unit is to be hidden away behind a bulkhead, Wi-Fi reception maybe reduced. In this situation, it is advisable
to fit SMA extension cables, which are available from many suppliers. The Extension cable length should be kept
to a minimum, between 1m and 3m would be recommended.

To fit the SMA Extension cables, unscrew the 3dB antenna from the iKConnect and screw the extension cable
between the iKConnect and the antenna. Now you will be able to hide the iKConnect unit behind a bulkhead and
just mount the antenna in the cabin for maximum Wi-Fi range.

Provide  power  conn

ections  to  the  unit  from  the  boat’s  supply.  Power  is  connected  to  the  iKConnect  via  the

supplied;  2.1mm  DC  Jack  Plug  cable  assembly.  The  cable  has  two  wires;  the  Red  wire  is  the  positive  (+)
connection and the Black wire is the negative (-) connection. Connect the wires to the nearest source of primary
12V DC power. 

Ensure that the supply is connected via a suitable 1A fuse or circuit breaker.

 Add the fuse

in the positive power connection to the unit if necessary.

IMPORTANT

 

– if connecting the iKConnect to a Digital Yacht WL70 Long Range Wi-Fi Adaptor, remember that

the  WL70  only  has  a  5m  USB  cable,  which  should  not  be  extended,  so  make  sure  that  the  iKConnect  is  sited
within 5m of where the WL70 is mounted.

Installation Step 2 

Use suitable fixings (not supplied) to fix the IKConnect to a flat surface 

– using the dimensions and details shown

in the drawing below. Note that the unit may be installed in any orientation.

Dimension drawing 

Once the unit is secured in place, position the antenna so that it is pointing vertically upwards or if connected via
an extension lead, mount and secure the antenna within the cabin area.

Содержание iKConnect










Отзывы: