background image

 

 

User Manual for AIT2500  V1.01 

TEL + 44 1179 554474 www.digitalyacht.co.uk 

[email protected]

  

Disposal of this product and packaging 

Please  dispose  of  the  AIS  transponder  in  accordance  with  the  European  WEEE  Directive  or  with  the  applicable  local 
regulations for disposal of electrical equipment.  

Every effort has been made to ensure the packaging for this product is recyclable. Please dispose of the packaging in an 
environmentally friendly manner. 

Accuracy of this manual 

The AIS transponder may  be  upgraded from time to time and future  versions of  the  AIS  transponder may therefore not 
correspond  exactly  with  this  manual.  Information  contained  in  this  manual  is  liable  to  change  without  notice.  The 
manufacturer of this product disclaims any liability for consequences arising from omissions or inaccuracies in this manual 
and any other documentation provided with this product. 

Radio Equipment Directive 

The  manufacturer  of  this  product  declares  that  this  product  is  in  compliance  with  the  essential  requirements  and  other 
provisions  of  the  Radio  Equipment  Directive  2014/53/EU  and  as  such,  displays  the  CE  mark.  The  RED  declaration  of 
conformity is provided as part of this documentation pack 

 

FCC notice 

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the 
FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful  interference  in  a  residential 
installation.  This  equipment  generates,  uses  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in 
accordance with the instructions, may cause harmful interference to radio communications.  

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device 
may not cause harmful interference, and (2) this device must accept any interference received, including interference that 
may cause undesired operation.  

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority 
to operate the equipment.  

WARNING: It is a violation of the rules of the Federal Communications Commission to input an MMSI that 
has not been properly assigned to the end user, or to otherwise input any inaccurate data in this device. 

 

Industry Canada notice

 

This  device  complies  with  Industry  Canada  licence-exempt  RSS  standard(s).  Operation  is  subject  to  the  following  two 
conditions:  

1. 

This device may not cause interference, and  

2. 

This  device  must  accept  any  interference,  including  interference  that  may  cause  undesired  operation  of  the 
device. 

This Class B digital apparatus complies with Canadian ICES-003. 

Le  présent  appareil  est  conforme  aux  CNR  d'Industrie  Canada  applicables  aux  appareils  radio  exempts  de  licence. 
L'exploitation est autorisée aux deux conditions suivantes :  

1. 

L'appareil ne doit pas produire de brouillage, et  

 

Содержание AIT2500












Отзывы: