3.2 Adjustments
The Station’s adjustments and programming are password protected, and are
available only to the factory and factory-trained maintenance personnel.
Authorized, factory-trained personnel should consult the maintenance manual for
the Station for further information.
3.3 Normal Repeater Operation
When the unit is placed in normal service, no user intervention is required. The
ID number of the incoming mobile/portable transmission is displayed on the front
panel LCD display. The RX and TX LED indicators will light, indicating the unit is
transmitting. The RF Power Amplifier cooling fan will turn on when the station
transmits.
Caution:
The DB-1000 Station should never be operated without an antenna or 50 ohm
test load attached.
3.4 Automatic Station ID
The DV/IP Base Station has a built-in automatic Morse Code generator that may
be programmed to periodically transmit the assigned call sign of the base station
with a frequency modulated carrier wave, if required or desired. The MCW audio
frequency is 1,350 Hz. Consult the factory for programming information.
4 Maintenance and Repair
4.1 General
There are no user-servicable components in the station. There are no manual
adjustments or alignment controls. The station has hazardous voltages present
inside. Testing, installation and repair must be performed by qualified
technicians trained in the handling of this equipment. Severe, potentially lethal
electric shock can occur from contact with the AC input terminals, power supply
connector or AC fuse, accessible when the top cover is removed. Therefore, the
top cover should only be removed by experienced and qualified technicians
DB-1000 Station - Instruction Manual
Publication PN 09-05-0002-01 (c) 2006 Digital Wireless Corporation
Page 7
Version -03 04 MAY 06
File: Base Station Manual.lwp
