OSD Menu_Privacy
2
POLYGON
- ZONE NUM : Select the zone number between 0~7.
- ZONE DISP : Zone display ON/OFF.
- POS0-X : Move the mask’s upper left angle left to right.
- POS0-Y : Move the mask’s upper left angle up and down.
- POS1-X : Move the mask’s upper right angle left to right.
- POS1-Y : Move the mask’s upper right angle up and down.
- POS2-X : Move the mask’s lower right angle left to right.
- POS2-Y : Move the mask’s lower right angle up and down.
- POS3-X : Move the mask’s lower left angle left to right.
- POS3-Y : Move the mask’s lower left angle up and down.
- Y LEVEL : The higher the number, the brighter the color will appear.
- CR LEVEL : The higher the number, the more red tone will added to the zone’s color.
The lower the number, the more green will be added to the zone’s color.
-CB LEVEL : The higher the number, the more red tone will be added to the zone’s color.
The lower the number, the more red will be added to the zone’s color.
* High CB Level + High CR Level = Pink
* High CB Level + Low CR Level = Sky Blue
* Low CB Level + High CR Level = Orange
- TRANSPARENCY : Set the mask’s transparency level from 0~3. The default value is 2.
PRIVACY
POLYGON
BOX
POLYGON
RETURN
ZONE NUM
ZONE DISP
POS0-X
POS0-Y
POS1-X
POS1-Y
POS2-X
POS2-Y
POS3-X
POS3-Y
Y LEVEL
CB LEVEL
CR LEVEL
TRANS
RETURN
OFF
ON
0
ON
80
5
88
5
88
13
80
13
10
10
10
2
You can hide some parts of the screen for privacy masking. A total of 24 different privacy masking
zones are available, including 16 square zones and 8 polygon shaped zones.
PRIV
2
EXPO
MOTI
PRIV
RGB
D&N
FUNC
SET
EXIT