
7
Installation -
Installation
Visible installation:
1. Place the camera module on the installation surface.
2. Pass the camera module’s cable into the cable holder on the bracket
and cover the camera module with the surface mount bracket.
3. Secure the bracket to the mounting surface using the tapping screws
(M3x20) and anchor blocks included with the camera.
4. Use the cable clamps to secure the camera’s cable with a tapping
screw (M4x20) included with the camera (optional).
Visible installation with the pan/tilt bracket:
1. Drill a hole on the mounting surface and insert an anchor block into the
hole.
2. Secure the pan/tilt bracket to the mounting surface using the tapping
screws (M4x25) included and tighten it into the anchor block.
3. Press the rotate ring into the bracket’s mount ring.
4. Place the camera module on the pan/tilt bracket. Make sure the lens is
facing outward from the bracket
5. Secure the surface mount bracket on top of the camera module using
the tapping screws (M3x6) included. Align the screw holes with the
holes on the rotate ring on the pan/tilt bracket and tighten the screws
to secure.
6. Use the cable clamps to secure the camera’s cable with a tapping
screw (M4x20) included with the camera (optional).