16
STEP 5:
Configure recording
* Supported cameras and devices on the same network as the server will be added automatically
under the server’s resource tree. The cameras and other network devices must have the same
network settings as the server. If the cameras are not listed, follow the steps below to add the
cameras manually. Skip to 1 if all cameras have been discovered automatically.
a. Right-click on the server and select “Add Device” from the context menu.
b. Enter the IP address of the camera in the device address field. Enter the camera’s username and
password. Leave the Discovery Port to Auto.
* The IP address of the cameras can be obtained via the DW IP Finder™.
c. Once the camera is discovered, check the box next to it from the results and click “Add Selected”.
d. Repeat until all the cameras are added.
1. Right-click on the camera to set up recording. Click on “Camera Settings” from the context menu.
