Mounting
The housing is of metal construction and has 4 threaded mounting holes on the rear of the
housing, (see diagram below).
Points to note:
Mounting: It is recommended to use a mounting bracket that allows the display to be set to the
ideal viewing angle.
Sound: Speakers are on the bottom of the housing, ensure they are not covered.
The diagram shows the mountin holes used on the
VideoFlyer Range. The 20" model has both holes Ref A
and B available.
Ref
Standard
A
VESA
B
VESA
C
Digital View
Use mounting holes reference A or B, ie 100mm and
75mm spacing
Power
The display system is supplied with an AC to DC power adaptor. This should be connected to the
mains.
The power switch is mounted on the back of the housing, ensure the unit is switched on. If you
have a custom version with no power switch on the housing then the unit will power on
immediately it is connected to the power supply. If it does not then please check the power supply.
Notes:
Power input: 12V DC, 6A (min.)
Power cord: You need an AC power cord that is certified for the country or region you are
located. Using an improper power cord might cause severe damage to your unit.
20” VideoFlyer User Guide
July 2006 v.m4.0
Screws are 4mm diameter
100mm (A)
10
0m
m
(A
)
75mm (B)
75
m
m
(B
)
50mm (C)
50
m
m
(C
)
