VideoFlyer 20”
Model : VF-200
User Guide
Introduction
The following is intended as a guide to installation and initial setup of the standard 20”
VideoFlyer, an Internet connected digital video player and display.
This Guide covers:
•
Mounting information: How to attach the unit to a fixture
•
Installation of a Compact Flash (CF) memory card
•
Power: On/off, power considerations
•
Setup using the optional 8 segment touch screen
•
Operation: How to play video on VideoFlyer
Preparation
It is advisable to do a quick check that the display is working properly prior to installation. Simply
install the CF card as explained below and then power on. If the unit powers up then proceed with
installation.
CF Card Installation
•
Remove the access cover on the rear of the display unit, see diagram
.
•
The CF card should be inserted carefully with the label side visible.
WARNING:
Do not force
the CF card. Forcing the CF card can damage the connector pins in the display unit and result
in expensive repairs.
•
To eject the card push the Eject button as shown in the diagram.
20” VideoFlyer User Guide
July 2006 v.m4.0
Vol ume
DC 12V
RS - 232
No rmal
Test
CF Card
compartment
Volume
Control
Power in
RS-232
Test / Normal switch
(Default set to Normal)
