Digital View SVX-4096-VW, Инструкция по эксплуатации

Страница: 39 / 52

Specifications subject to change without notice
© Digital View Ltd
– Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc)
Page 39 of 52
Video Wall
vertical bezel
dimension 0xdd 0x48
“nnnn”
? Command
Value
Query
Backlight control 0xe0,
nn | “+” | “-” |
“R” | “r” |
“?”
Set Backlight level =
value/increment/decrement
Reset
Query nn = 0x00~ 0x64 (0~100%)
Default: 0x64 (100%)
Backlight On/Off 0xe1,
“0” | “1” |
“R” | “r”
“?”
Backlight Off / Backlight On
Reset
Query
“0” – Backlight Off
“1” – Backlight On. (Default)
(non/Off
Swap PIP / 2P
PBP video source 0xe3 Swap Main and PIP Source (PIP
mode), left & right source (PBP
LR) or Top & Bottom (PBP TB)
“0” – fail.
“1” – successful.
Backlight DA/PWM 0xe5
“0” | “1” |
“R” | “r”
“?” Set backlight control method:
PWM / DA
Reset
Query
“0” – PWM (Default)
“1” – D/A
Backlight PWM
frequency 0xe6,
nnn | “+” | “-” |
“R” | “r” |
“?”
Set backlight PWM frequency =
value/increase 20Hz/decrease
20Hz
Reset
Query
Value
100Hz : “0”,”6”,”4”
120Hz : “0”,”7”,”8”
140Hz : “0”,”8”,”C”
160Hz : “0”,”A”,”0” (Default)
180Hz : “0”,”B”,”4”’
200Hz : “0”,”C”,”8”
220Hz : “0”,”D”,”C”
240Hz : “0”,”F”,”0”
260Hz : “1”,”0”,”4”
280Hz : “1”,”1”,”8”
300Hz : “1”,”2”,”C”
320Hz : “1”,”4”,”0”
340Hz : “1”,”5”,”4”
360Hz : “1”,”6”,”8”
380Hz : “1”,”7”,”C”
400Hz : “1”,”9”,”0”
420Hz : “1”,”A”,”4”
440Hz : “1”,”B”,”8”
Backlight Invert 0xe7
“0” | “1” |
“R” | “r”
“?” Set invert backlight level :
Off / On
Reset
Query
“0” – Off (Default)
“1” – On
PIP window
transparency Level 0xed,
nn | “+” | “-” |
“R” | “r” |
“?”
Select PIP transparency level =
value/increase/decrease
Reset
Query nn:
0x00~0x0A (no ~ total transparency)
Default: 0x00
Set IR ID
“0xee”,”0x5A”
nn | “+” | “-” |
“R” | “r” |
“?”
Set IR ID
Reset
Query IR ID 1~255
nn = “0” ”1” ~ “46” “46”
Reset ID is 0
nn = “30” “30”
Minimum backlight
level
0xee, “0x5C”
nn | “+” | “-” |
“R” | “r” |
“?”
Set minimum backlight level=
value/increment/decrement
Reset
Query Minimum Backlight value.
nn: 0x00 ~ 0x32 (0~50%)
Default: 5%
OSD switch mount
Lock
“0xee”, “0x62”
“0” |”1”
”?”
Unlock / Lock
Query
“0”- Unlock (Default)
“1”- Lock, no response to OSD switch
mount keys
Default Power
“0xee”, “0x6B”,
“0x50”
Default power state after
supplying power to controller