Digital View PR-1200, Инструкция по эксплуатации

Страница: 43 / 61

Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.5: 27 March 2012 (SGX-1920L_manual.doc) Page
43 of 60
“35”, “46”- 95%
“35”, “45”- 94%
“35”, “44”- 93%
“35”, “43”- 92%
“35”, “42”- 91%
“35”, “41”- 90%
“35”, “39”- 89%
“35”, “38”- 88%
“35”, “37”- 87%
“35”, “36”- 86%
“35”, “35”- 85%
“35”, “34”- 84%
“35”, “33”- 83%
“35”, “32”- 82%
“35”, “31”- 81%
“35”, “30”- 80%
IR Lock “0xee”, “0x48”
n | “0” | “1” |
“r” | “R” |
“?”
IR Lock Disable / IR Lock
Enable
Reset
Query “0” – IR Lock Disable
“1” – IR Lock Enable
Light Detector “0xee”, “0x4A”
“0” | “1” |
“R” | “r”
”?”
“S” | “s”
Light Detector Off / Light
Detector On
Light Detector On/Off Query
Light Detector Value Query “0” –Light Detector Off
“1” –Light Detector On.
“?” – Light Detector On/Off
Query “S”|”s” –Light Detector
Value Query 0x00~0xFF
Safe Area Marker
Enable “0xee”, “0x4B”
“0” |”1” Safe Area Marker Off / Safe
Area Marker On “0”- Off
“1”- On
Aspect Marker
Enable “0xee”, “0x4C”
“0” |”1” Aspect Marker Off / Aspect
Marker On “0”- Off
“1”- On
Display real time
clock “0xee”, “0x4D”
“0” |”1”
Real Time Clock Display Off /
Real Time Clock Display
“0”- Off
“1”- On
Custom Sizing 0xef,
“0” | “1” | “2”
”?” Custom sizing selection :
Overscan / Normal / Custom
Query “0” – Overscan
“1” – Custom / Underscan
“2” – Normal
Function Command Description Acknowledge (if enabled)
Send Display
Mark 0xF1,
”S” |
”0x21” | ”0x40”
”0x60” | ”0x7E”
Return “1”
“S” = “0x53 or 0x73”
ASCII “0x21,0x40,0x60,0x7E”
Return “ 0x31” “S” – Send Command
“Text” – Character
“1” - successful.
e.g Send Display Mark
RS232 Code: “0xF1 0x53 0x21”
Return Code: “0xF1 0x53 0x21 0x31”
Clear Display
Mark
0xF1,
”C”
Return “1”
“C” = “0x43 or 0x63”
Return “ 0x31”
“C” – Clear command
“1” - successful.
e.g Clear Display Mark
RS232 Code: “0xF1 0x43”
Return Code: “0xF1 0x43 0x31”
Display Mark
Horizontal
Position
0xF1,
|”H” |”ss”|
Return “nn” “H” = “0x48 or 0x68”
------------------------------------------
“nn” = “0x30,0x30~0x46,0x46”
“H” – Horizontal Position command
“ss” – Set Horizontal Position number
“nn” – Return Position number
e.g Set Display Mark Horizontal Position
RS232 Code: “0xF1 0x48 0x30 0x31”
Return Code: “0xF1 0x48 0x30 0x31 0x30 0x31”