Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.01 : 15 Dec, 2017 (hsp-1920-manual-v101.doc)
Page
27 of 47
SPECIFICATIONS
Panel compatibility
Compatible with 1920x1200, 1920x1080, 1680x1050, 1600x1200, 1440x900
1366x768, 1280x1024, 1024x768, 800x600 & 640x480 resolutions of TFT LCD
panels.
A specified BIOS and some factory adjustment may be required for individual
panel timings.
No. of colours
Up to 3 x 10 bit providing 1.06 billion colors.
Panel power
DC 3.3V, 5V, 10V, 12V, 18V
Panel signal
LVDS
Vertical refresh rate
60Hz at 1920x1200, 60Hz at 1920x1080, 60Hz at UXGA and up to 75Hz other
lower resolution
Display clock maximum
165MHz
ADC clock maximum
195 MHz
DVI differential input clock maximum
165MHz
Graphics formats
Standard VESA VGA, SVGA, XGA, SXGA, WXGA, UXGA, WUXGA
Other special formats through specified BIOS and factory adjustment.
Graphics auto mode detect
VGA, SVGA, XGA, SXGA, WXGA, UXGA & WUXGA interlaced and non-interlaced
Standard input at source (analog
RGB)
VGA analog (15 pin) standard with automatic detection of:
Digital Separate Sync;
Composite Sync
Sync On Green.
Video formats
PAL, NTSC & SECAM
Video inputs
VGA
DVI-D
HDMI 1
HDMI 2
HD/SD Component video
Composite video 1
Composite video 2
Functions display
On screen display (OSD) of functions
OSD menu functions
Image controls:
Contrast, Black level, Sharpness, Hue, Saturation, Color temperature.
Other features:
Image position, Clock, Phase, Auto Picture Setup, Aspect/Size, Backlight
brightness adjustment, Input source select, Auto Color Gain, OSD menu
transparency, OSD time out, Reset to Factory Defaults, Image orientation,
Software update(USB), Auto Source Seek, Failover, Backlight Invert, Backlight
control (D/A or PWM), Backlight Frequency, Minimum backlight level adjustment,
Volume control, Menu language, Auto power, video standard, gamma, OSD
transparent, Hotkey 1&2,
OSD menu controls available
Power On/Off
Backlight brightness (for voltage control backlight driver only)
OSD Menu
OSD Select up
OSD Select down
S
Setting -
Control interface
Buttons, RS-232, Remote control
Settings memory
Settings are stored in non volatile memory
PC Connectivity
VGA / SVGA / XGA / SXGA / UXGA / WUXGA analog or digital
Controller dimensions
179mm x 120.4mm (7.” x 4.74”)
Power consumption
10w approx. (not including panel power consumption)
Power load maximum
The controller has an overall 3Amp current limit.
Input voltage
12V/24VDC +/- 25%**
Power protection
Fuse fitted (Resettable)
Storage temperature limits
-40
o
C to +85
o
C
Operating temperature limits
-40
o
C to +80
o
C**
Coating
Silicone resin conformal coating. (MOD) DEF-STAN 59/47 Issue 4 & UL QMJU2
compliant.
Use of memory on board
- 1 pc SRAM - MCU & RAM (MSD8220LB) on U11, 128Mbytes which is a volatile
memory : SRAM for OSD and RAM for frame buffer.
- 1 pc Flash - (GD25Q64) on U3, 64Mbits which is a non-volatile memory for
system program.
- 1 pc EEPROM - (24C02N) on U23, 2KBits which is a non-volatile memory for
VGA EDID.
- 1 pc EEPROM- (24C128C) on U14, 128Kbits which is a non-volatile memory for
System Setting Storage.
** Overall suitability for usage in critical applications must be independently tested and verified by the user.
