Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.01 : 15 Dec, 2017 (hsp-1920-manual-v101.doc)
Page
2 of 47
Introduction
HSP-1920 is the harsh Environment version of the SP-1920. Provides full SP-1920 feature set, plus wide range
operating temperature and voltage range; shock and vibration tolerance and conformal coating for extreme
environment applications.
TFT (active matrix) LCD panels of up to 1920x1200 resolutions.
Support true 10 bits panel.
Computer video signals of VGA, SVGA, XGA, SXGA, WXGA, UXGA, WUXGA standard.
Support 2 x HDMI, DVI , VGA input support up to 1920x1200 60Hz input signals
Support Component and 2 x Composite Video signals input of NTSC, PAL and SECAM standard.
Low mass tantalum capacitors for maximum vibration and shock tolerance, conformal coating, operating
temperature range from -40
o
C to +80
o
C plus calculated MTBF in excess of 100K hours.
Overall suitability for usage in critical applications must be independently tested and verified by the user.
Ordering information :
Controller
Part number
Ordering part number
HSP-1920
P/N 41760011X-3
P/N 4176001XX-3
HOW TO PROCEED
Ensure you have all parts & that they are correct, refer to:
•
Connection diagram
•
Connector reference (in following section)
•
Assembly notes (refer to page 4 – 5)
Check controller switch & jumper settings (errors may damage the panel)
Prepare the PC
Connect the parts
Understand the operation & functions
IMPORTANT USAGE NOTE
This equipment is for use by developers and integrators, the manufacturer accepts no liability for damage or injury
caused by the use of this product. It is the responsibility of the developer, integrators or other user of this product to:
•
Ensure that all necessary and appropriate safety measures are taken.
•
Obtain suitable regulatory approvals as may be required.
•
Check power settings to all component parts before connection.
DISCLAIMER
There is no implied or expressed warranty regarding this material.
Controller Solution Generator
Full web resource matching controllers & panels with
connection diagrams
for download.
See at :
http://www.digitalview.com/controllers/csg.php
