Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.2: 3 Dec, 2010 (AVP-1600_manual.doc)
Page
19 of 35
CONTROLLER DIMENSIONS
The maximum thickness of the controller is 17.6mm (measured from bottom of PCB to top of
components, including any underside components & leads). We recommend clearances of:
•
5mm from bottom of PCB - if mounting on a metal plate we also recommend a layer of
suitable insulation material is added to the mounting plate surface.
•
10mm above the components
•
3~5mm around the edges
Any of the holes shown above can be used for mounting the PCB, they are 3.2mm in
diameter.
CAUTION: Ensure adequate insulation is provided for all areas of the PCB with special
attention to high voltage parts such as the inverter.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
