Digital Projection TITAN LASER WUXGA, Инструкция по установке и быстрому запуску, Страница: 84 / 137

Digital Projection Ltd. Titan Laser WUXGA Using the projector
OSD settings
OSD Settings
Menu Position
Menu Transparency
Language
Time Out
Message Box
Center
0
English
30 Seconds
On
Menu Rotation Off
l
Language sets the OSD language.
l
Menu Position determines where the OSD should appear on the screen when activated.
l
Menu Transparency sets OSD transparency between 0% (no transparency), 25%, 50% and 75%.
l
Time Out determines how long the OSD should remain on screen if no buttons are pressed. Choose
Always On to disable this feature.
l
Message Box determines whether projector status messages should appear on the screen.
l
Menu Rotation Choose from Off, Clockwise and Anticlockwise . Select a rotation option to rotate the
OSD menu when the projector is displaying in portrait.
Memory
Presets from one input
cannot be applied to
another input.
Presets for inputs HDMI 3
and 4 do not contain all
the settings normally
stored for other inputs.
See memory scheme and
memory items on
page 125 for information
about the parameters that
can be saved in a memory
preset.
The current image settings can be saved as a preset, which you can recall later. The default settings can be
recalled at any time as well.
Up to four custom presets can be stored for each input.
To recall a saved preset:
l
Select Recall Memory and press ENTER/OK , then select a preset from Preset A to Preset D . Select
Default to load factory default values.
To save a preset:
l
Select Save Settings and press ENTER/OK , then choose from Preset A , Preset B, Preset C and
Preset D .
Rev A January 2019
page 84
Operating Guide
Notes