Digital Projection
M-Vision Cine 320 Series
A TOUR OF THE MENUS
Operating Guide
42
Rev D July 2014
Trigger 1 and Trigger 2
The
Trigger 1
and
Trigger 2
outputs are interchangeable:
Screen trigger
can be connected to an electrically operated screen, automatically deploying the screen when the projector starts
up, and retracting the screen when the projector shuts down.
Aspect Ratio trigger
can be used to control screen shuttering for different aspect ratios.
For each Trigger setting, use the
LEFT
and
RIGHT
arrow buttons to select from:
Screen
trigger occurs when the projector is in RUNNING mode.
16:9
trigger occurs when 16:9 aspect ratio is selected.
Theaterscope
trigger occurs when Theaterscope aspect ratio is selected.
4:3
trigger occurs when 4:3 aspect ratio is selected.
4:3 Narrow
trigger occurs when 4:3 Narrow aspect ratio is selected
RS232
trigger output follows the
On
or
Off
setting specified in a
trig.1
or
trig.2
command received from a PC via the
RS232 serial input.
Auto Source
Use the
LEFT
and
RIGHT
arrow buttons to select from:
On
The projector searches for an alternative input source when the current input is disconnected.
Off
The projector shows a “blank” screen when the current input is disconnected.
Notes
To set what a ‘blank’ screen looks
like, use the
Blank Screen
setting
in the
System
menu.
