Digital Projection
M-Vision Cine 320 Series
A TOUR OF THE MENUS
Operating Guide
31
Rev D July 2014
Brightness, Contrast, Saturation, Hue, Sharpness, Noise Reduction
These settings use a slider
(Fig. 1)
.
To adjust any of these settings:
1. Highglight the setting you wish to select.
2. Press
LEFT
or
RIGHT
once to open the slider.
3. Use the
LEFT
and
RIGHT
arrow buttons to adjust the value from 0 to
200:
4. To return to the
Main
menu, press
MENU
.
Overscan
This setting, if switched on, removes unwanted artefacts from the edges of
your image by cropping the edges or increasing the size of the image to force
the edges off-screen.
Unwanted artefacts along the image edges usually occur when the projector
is connected to a low quality input souce..
Use the
LEFT
and
RIGHT
arrow buttons to select from:
•
Off
•
Crop
Blanks a 3% border from the left and right edges of the image.
•
Zoom
Increases the horizontal and vertical resolution of the displayed image by
6%, so that the all four edges fall outside the screen area.
Notes
Decrease
Saturation
if the colors
appear too bright; increase it if the
colors appear muted or washed out.
Decrease
Hue
to shift the hue
toward red; increase it to shift the
hue toward green.
Fig. 1 Brightness slider
