Digital Projection HIGHlite Cine 330 3D Series, Руководство пользователя

Страница: 48 / 113

page 40
Digital Projection HIGHlite Cine 330 3D Series
Operating Guide
A TOUR OF THE MENUS
Rev E August 2014
System menu
This menu contains the following settings:
•
OSD Settings
Controls the positioning and behavior of the OSD.
•
Blank Screen
Defines what appears on the screen while the projector is running with
no input signal.
•
Auto Power Off
Set this to On if you want the projector to go into STANDBY mode when
no input source is detected for 20 minutes.
•
Auto Power On
If this is
On
, the projector will start up as soon as the mains is connected.
If Off , the projector will go into STANDBY mode.
•
Projection Mode
Tabletop is for a unit standing on its feet; set to Ceiling if the projector is
mounted upside down. Front and Rear define whether the projector is in
front of the screen or behind it.
•
Startup Splash
Show or hide the Digital Projection logo at startup.
•
Altitude
High increases the fan speed to compensate for reduced air density at
high altitude.
•
Lamp Power
Choose between higher brightness and longer lamp life. Set this to
Economy to run the lamp at reduced power.
Highlight the setting you wish to edit, and then either press
ENTER/SELECT
to access it, or use the
LEFT
and
RIGHT
arrow buttons to switch
between values.
Press
MENU
to go back.
Notes
System Menu
Blank Screen
SYSTEM >>
OSD Settings <Sub-menu>
Black
Auto Power Off On
Auto Power On Off
Projection Mode
Startup Splash
Altitude
Lamp Power Front Tabletop
On
Auto
Standard