Rev A August 2009
Page 5.3
Digital Projection
TITAN 1080p 3D, Dual 3D. Ultra Contrast
User Manual
5. Userware
Rev A October 2010
Page 5.2
Digital Projection
HIGHlite 6000
User Manual
5. Userware
Notes
To use the
Why-I Userware
the
j ava Runtime Environment
software must be installed on
your computer.This software
can be downloaded, free of
charge from www.java.com.
The
LAN IP Address
of the
projector can be found on the
Discovery page of the
userware. See section
4.
Controlling the projector
.
The Userware can be used to
control only one projector at a
time, and only one instance can
be running at one time.
More than one computer can be
used to control more than one
projector on the same network.
Introduction
The
Why-I Userware
provides an intuitive interface to enable control of many of
the features of the projector from a personal computer, via a LAN connection.
Because the HIGHlite 6000 is not equipped with an on screen display, most of the
features are only available from external control applications such as this.
When the Userware is started, the
Info page
will display immediately. The
Page
buttons are always visible at the sideof the display:
If the projector is able to connect to the computer you will see the screen shown
below if the projector is in standby mode. Some information such as temperature
are not available in standby mode.
