Page 2.5
Rev A October 2010
2. Installation
Digital Projection
HIGHlite 6000
User Manual
Notes
If the lens is to be shifted in
two directions combined, the
maximum range is somewhat
less, as can be seen below.
full horizontal or vertical shift
without distortion
combined shift
is reduced
Shifting the image
Ideally, the projector should be positioned perpendicular to the screen.
The normal position for the projector is at the centre of the screen. However, you
can set the projector above or below the centre, or to one side, and adjust the image
using the
Lens shift
controls on the remote control to maintain a geometrically
correct image.
The image can be shifted by up to:
± 0.6 of the height of a full screen image (known as 120% shift)
± 0.15 of the width of a full screen image (known as 30%)
It may physically possible to shift the lens further than this, however there will be so
me distortion of the image beyond the ranges specified above.
·
·
+ 0.6 H
– 0.15 W
+ 0.15 W
