Digital Projection E-Vision Laser 4K Series, Руководство пользователя

Страница: 45 / 126

page 37
Digital Projection E-Vision Laser 4K Series
Operating Guide
USING THE PROJECTOR
Rev A June 2017
Image menu
•
Picture Mode
Choose from
High Bright
,
Presentation
and
Video
.
Use a different setting depending the type of input source.
Press
ENTER/SELECT
to open the list.
Use the
UP
and
DOWN
arrow buttons to select a picture mode from the list, then
press
ENTER/OK
to confirm your choice.
Press
EXIT
to return to the main menu.
•
Dynamic Black
Set to
On
to allow for increased contrast in darker scenes by modulating the light
source.
•
Smooth Picture
When this feature is
On
, the projector is able to display lower resolution sources in
4K UHD resolution. Sources will be displayed within WQXGA+ if
Smooth Picture
is
Off
.
Auto
will allow the projector to decide based upon the bandwidth of incoming
sources.
•
Gamma
Choose a de-gamma curve from
1.0
,
1.8
,
2.0
,
2.2
,
2.35
,
2.5
,
S-Curve
and
DICOM
.
Used correctly, the
Gamma
setting can improve contrast while maintaining good
details for blacks and whites.
If excess ambient light washes out the image and it is difficult to see details in dark
areas, lower the
Gamma
setting to compensate. This improves contrast while
maintaining good details for blacks. Conversely, if the image is washed out and
unnatural, with excessive detail in black areas, increase the setting.
S-Curve
is an enhanced mid-tone gamma.
DICOM
is a simulated DICOM display, which can be used for training applications.
•
Brightness, Contrast, Saturation, Hue, Sharpness
Highlight the setting you wish to edit, and then press
ENTER/OK
, or the
LEFT
or
RIGHT
arrow button to open the slider.
Use the
LEFT
and
RIGHT
arrow buttons to adjust the slider.
Press
EXIT
to close the slider and return to the menu, or
MENU
to close the slider
and return to the projected image.
•
Noise Reduction
Choose a level of noise reduction from
Off
,
Low
,
Middle
and
High
.
•
Freeze
Freezes the current frame.
•
Resync
Press
ENTER/OK
to force the projector to resynchronise with the current input.
Notes
The following settings are not
available with input HDMI 3 or HDMI
4:
•
Smooth Picture
•
Brightness
,
Contrast
,
Saturation
,
Hue
,
Sharpness
•
Noise Reduction
The Freeze and Resync functions
will also be unavailable.
Image
Dynamic Black
Gamma
Picture Mode
Brightness
Saturation
Hue
Contrast
Sharpness
Freeze
Noise Reduction
Off
2.2
High Bright
Resync
100
100
100
100
10
Smooth Picture Auto
Off
Brightness 100