Digital Projection E-Vision Laser 13000 WU Series, Инструкция по установке и быстрому запуску

Страница: 39 / 125

Using the menus Digital Projection Ltd. E-Vision Laser 13000 WU Series
Editing projector settings
Menu Name
Highlighted Item Current Value
Menu Item
Highlighted Value
Value
Value
Value
Menu Item
List of Values
Some menu items may be
unavailable due to
settings in other menus.
Unavailable menu items
appear gray
If the highlighted menu item contains a list of values to choose from, you can change the value by doing the
following:
1. Highlight the menu item and press ENTER/OK .
2. In the list of values that opens, use the UP and DOWN arrow buttons to highlight a value, then press
ENTER/OK again to select the highlighted value.
Using a slider to set a value
Parameter Value
Slider
Some parameters open a slider. To set such a parameter:
1. Press the LEFT or RIGHT arrow button, or ENTER/OK . The arrow buttons will open the slider and adjust
the value at the same time. ENTER/OK will open the slider without altering the initial value.
2. Use the LEFT and RIGHT arrow buttons to move the slider.
3. When ready, press EXIT to exit the slider and return to the menu, or press MENU to exit the slider without showing the menu again.
Operating Guide
Rev A June 2019
page 39
Notes