page 46
Digital Projection E-Vision 6800 3D Series
Operating Guide
MENU MAP
Rev A January 2015
Menu Map
Menu
Submenus and controls
INPUT
HDMI, DVI-D, HDBaseT, VGA, Component 1, Component 2, S-Video, Video
TEST PATTERN
Off, White, Black, Red, Green, Blue, Crosshatch, Burst, H Ramp, Color Bar, Checkerboard
LENS
Zoom, Focus, Shift V, Shift H (commands, adjustment via arrow buttons)
IMAGE
Image Mode : Bright
, Presentation, Video
Brightness, Contrast: sliders, 0 to 200 (100)
Gamma: 1.0, 1.8, 2.0, 2.2, 2.35, 2.5
Dynamic Black: On, Off
Saturation, Hue: sliders, 0 to 200 (100)
Sharpness: slider, 0 to 31
Noise Reduction: slider, 0 to 15
Position And Phase
VGA Setup: H Total, H Start, H Phase, V Start: sliders, 0 to 200 (100)
Digital Alignment
Digital Zoom: slider
Digital Pan: slider
Digital Scan: slider
Reset (command)
H/V Alignment
H Zoom: slider
V Zoom : slider
H Shift: slider
V Shift: slider
Reset (command)
Resync (command)
Notes
Some of the information in this menu
map is summarised. See the actual
menu on the projector for full detail.
Some menu options and controls
may not be available due to settings
in other menus. These will be lighter
in color in the OSD.
Where it would be helpful, some
menu options are described in more
detail earlier in this operating guide.
Some settings are associated with
the current input and the value of
the
Image Mode
setting (
Bright
,
Presentation
or
Video
). The
projector automatically stores values
of such settings to reuse when an
Input
/
Image Mode
combination
is selected again. For example, if
you increase the
Contrast
value
while on the DVI-D input with I
mage
Mode
set to
Bright
, the next time
you use the DVI-D input with
Image
Mode
set to
Bright
, the projector
will automatically set the same
Contrast
value.
Settings NOT associated with an
Input
/
Image Mode
combination
are called
global settings
and are
indicated with a globe icon
in
this section.
