page 44
Digital Projection E-Vision 6800 3D Series
Operating Guide
USING THE PROJECTOR
Rev A January 2015
Setup menu continued from previous page
System
•
Auto-Source
If this setting is
On
, the projector will automatically search for an active input
source.
•
Auto Power Off
Set this to
On
if you want the projector to go into STANDBY mode when no
input source is detected for 20 minutes.
•
Auto Power On
•
Set this to
On
if you want the projector to start up immediately when the
mains is connected.
•
Set this to
Off
if you want the projector to go into STANDBY mode when
the mains is connected. In this case, the projector will not start up until the
POWER
button is pressed on the control panel or the remote control.
•
Startup Logo
Set this to
On
if you want the DP logo to show when the projector is first
switched on.
•
Blank Screen
Choose from
Logo
,
Blue
and
Black
.
•
Trigger
Choose from
Screen
,
16:9
,
TheaterScope
,
4:3
,
4:3 Narrow
or
RS232
to
determine what will cause the trigger output to activate.
•
Infrared Sensor
Choose from
Both
,
Front
,
Rear
or
HDBaseT
.
•
Resync Adjust
•
Language
Change the OSD language.
Notes
Setup >> System
Select Item
[RETURN] Back
Auto Power Off
Auto Power On
Blank Screen
Trigger
Infrared Sensor
Auto Source
Both
8
Off
Startup Logo
Adjust
Off
Off
Off
Logo
Language
Auto
Resync Adjust
On
