Digital Monitoring Products XR40 Security Command Executive Series, Руководство пользователя

Страница: 26 / 42

22
Output Schedules
User Code Level: Master
Setting Output (OUT) schedules
The Schedules function allows you to set up a schedule for each of
the four outputs connected to your system to turn ON and OFF
automatically.
1. Access the User Menu.
2. Press COMMAND until SCHEDULES? displays. Press any
SELECT key.
3. The keypad displays PRM EXT OUT. Press the SELECT key
under OUT.
4. At the OUTPUT NO: – display, enter the output number you
want to program. Press the COMMAND key.
5. The keypad displays SUN MON TUE WED. Press the
COMMAND key to display THU FRI SAT.
6. Press the SELECT key under the day you want to program.
Note: After selecting the day of the week for the schedule to occur,
the keypad displays any currently programmed ON OFF times
previously set for that day. This feature allows you to review
programmed schedules at any time.
7. If ON OFF times are displayed, the keypad then displays
DELETE KEEP. Press the SELECT key under DELETE to
enter new times.
8. The keypad then displays ON TIME?. This is followed by the
display – : AM PM.
Enter a new relay ON time and select AM or PM.
The display changes to OFF TIME?. This is followed by the
display – : AM PM.
Enter a new OFF time for the relay.
Enter all schedule times using a 12 hour clock. For example, to
enter 6 AM you would enter a 0 + 6 + 0 + 0 and press the SELECT
key under AM. For 11 PM you would enter a 1 + 1 + 0 + 0 and
press the SELECT key under PM.
9. The keypad returns to the day of the week display allowing you
to enter another Output schedule. To exit the user menu or to
go back to the SCHEDULES? display, press the ARROW key.
10. To clear a schedule press DELETE and then AM when the
opening time is requested.
User Menu