20
User Menu
User Codes
continued
5. At the USER NUMBER: - prompt, enter the user number to
change and press COMMAND.
6. The display changes to CODE NO:
* * * *
. Enter the new
4-digit user code and press COMMAND. If the code you entered
is already in use, or is a code used internally by the system, the
keypad displays ALREADY IN USE. You must enter a different
4-digit user code.
7. If you are changing a code other than your own, the keypad next
displays LEVEL?.
8. Press any one of the SELECT keys. The keypad displays
MSTR STD LTD SCH.
Refer to item number 9 in the Adding User Codes section on the
previous page.
Important: Changing a user code does not change the user
number. User number two may have their user code changed from
1234 to 5678 but they are still user number two.
Ambush Codes
Your system may be programmed to allow user number 1 to be an
Ambush code. The Ambush code functions identically to other codes
with the exception that it sends a silent alarm to the central station.
This silent alarm alerts the operator to a duress situation at the
premises and prompts the immediate notification of the authorities.
Refer to the System Setup section of this guide to see if your system
is programmed for Ambush. If so, do
NOT program a code for user
number 1 unless you intend to use the Ambush function.
Schedules
User Code Level: Master
Function: The Schedules function allows you to program the times
at which you normally turn your burglary protection on and off each
day of the week. This information can then be used by the system
to automatically arm or disarm the burglary protection.
You can also use the Closing Check/Extend feature with Schedules
to ensure your system is armed by an authorized user at a specific
time. This option sounds the keypad buzzer and displays
CLOSING TIME! when a schedule expires. Users still on the
premises are required to arm the system or extend the schedule. If
the system is not armed, or the schedule not extended, a report can
be sent to the central station and/or a pager.
When a schedule expires and CLOSING TIME! is displayed, the
keypad next displays ENTER CODE: -. To silence the keypad
buzzer and extend the schedule for one hour, a user must either
enter a valid user code or present a card to the card reader.
Also, when a closing schedule expires, your system may turn on the
Closing Time Output. This output turns off anytime your system is
armed, or a schedule is extended or changed. See System Setup for
Output information.
Your system provides you with three different types of schedules:
Permanent schedules are used for automatic arming and disarming
and always occur at the same time until you change or delete them.
Extend schedules allow an authorized user to extend the present
day's permanent scheduled closing time.
Output schedules are used for automatically turning your system
outputs ON and OFF and always occur at the same time until you
change or delete them. See System Setup for Output information.
Содержание XR40 Security Command Executive Series
Страница 1: ...XR40 XR40 User s Guide ...
Страница 42: ...LT 0494 10 00 ...
