Digital Monitoring Products Canadain XR500, Руководство пользователя

Страница: 26 / 80

20 XR500/XR100 Canadian User’s Guide Arming and Disarming
Arming a Home/Sleep/Away or a Home/Sleep/Away
with Guest System
1. Enter your 4-digit user code. The keypad displays HOME
SLEEP AWAY.
2. Select HOME to arm the Perimeter only.
3. Select SLEEP to arm the Perimeter and Interior.
4. Select AWAY to arm the Perimeter, Interior, and Bedroom.
5. The system displays any Bypassed zones or faulted 24-hour
or Priority zones. A faulted Priority zone cannot be armed.
6. At this point you can force arm or bypass any faulted zones.
A zone that is force armed will be restored into the system if
it later returns to normal. A zone that is bypassed will remain
bypassed until the system is disarmed. See 6a through 6d.
6a. If a problem exists on a zone, the zone name and
problem is shown followed by OKAY BYPASS STOP.
6b. Select OKAY to force arm the zone(s) before arming.
6c. Select BYPASS to bypass the zone(s) before arming.
6d. Select STOP to stop the system from arming. Correct
the zone problem(s) and return to step 1.
7. A Home/Sleep/Away system keypad displays HOME SYSTEM
ON if you selected HOME, SLEEP SYSTEM ON if you selected
SLEEP, and ALL SYSTEM ON if you selected AWAY.
A Home/Sleep/Away with Guest system keypad displays
HOME GUEST 1 (or 2) ON if you selected HOME, SLEEP GUEST
1 (or 2) ON if you selected SLEEP, and ALL GUEST 1 (or 2) ON
if you selected AWAY.
8. The keypad next displays EXIT: ## INSTNT and begins to
count down the number of seconds remaining for you to
exit. When the delay expires, the exit zones are armed.
9. You can select INSTNT while EXIT: ## INSTNT is displayed to
immediately arm all exit zones and make them instant. The
keypad displays INSTANT.
Home/Sleep/Away and Home/Sleep/Away with
Guest System Disarming
Disarming: While the system is armed, you can only enter the
premises through an entry/exit delay door without causing an
alarm. After opening the door, the keypad sounds a prewarn tone
to remind you to disarm the system. You must disarm the system
before the prewarn tone expires or an alarm on the door zone will
occur.
During the prewarn tone, the keypad displays ENTER CODE:. Enter
your user code to disarm the system.
Schedules: If you have programmed schedules for your system and
a user code is entered outside of a schedule, the keypad displays
INVALID TIME. This lets the user know that they are disarming
outside of their authorized time.
Alarm Display : After disarming, the keypad dis plays any zones
that tripped or any transmission problems that occurred dur ing
the armed period. All burglary zones are then dis armed and any
by passed zones are automatically reset.
Disarmed Message:
The keypad displays ALL SYSTEM OFF after the
system disarms.
Central Sta tion Report:
A report of the system disarming can be
transmitted to the central sta tion. This is optional and can be
programmed for you at any time.