Digital Millwork Little Baron Fokker DR I, Руководство по монтажу

Страница: 20 / 35

Rear Flange Mount
o
Glue the cutout fuselage
doublers into place on either
side of the fuselage.
o
Slide the rear mount plywood
plate onto the IPS mount stick
and test fit the stick into the
fuselage.
o
Slide the mount plate back
until your motor fits properly
and mark the IPS mount stick
at the front of the mounting
plate.
o
Cutoff the IPS mount stick
and glue into place in
fuselage. Allow slight right
thrust by making the rear of
the mount stick flush with the
surface of the left doubler and
the front of the stick flush
with the surface of the right
doubler.
o
Test mount your motor to the
plate and cut off excess
material on the mounting
plate.
o
Glue the mounting plate onto
the IPS stick.
20