Digital Millwork Little Baron Fokker DR I, Руководство по монтажу

Страница: 18 / 35

Step 9: Motor Mount
o
If you had to cut the fuselage
profile to fit your motor in Step
2, mark and cut the front
fuselage doublers to fit. Two
sets of doublers are provided,
the solid ones are used for a
front collar type engine mount
and the cutout ones are for
mounts using the IPS stick (IPS,
spindle, or rear flange mount).
o
Install the motor mount type you selected:
IPS mount
o
Glue the cutout fuselage
doublers into place on either
side of the fuselage.
o
Test fit the IPS mount stick
into place and mark the length
needed to properly position
your motor so that the
propeller will clear the front
of the fuselage.
o
Cut the stick to length and
glue into place allowing slight
right thrust by making the rear
of the mount stick flush with
the surface of the left doubler
and the front of the stick flush
with the surface of the right
doubler.
18