WEB POWER SWITCH III
You may link to other power switches, your own web pages, or remote web sites by entering up to four URLs and descriptions in
the Setup page. For example, enter “Site Two Power Switch” in the description field with a URL of “192.168.0.102”. These links
appear on all pages.
Network Settings
A fixed IP address, network mask, gateway, and subnet mask must be entered in these fields. When changing IP addresses,
you may need to restart your network switch to validate the new IP on an “auto-configuring” switch port.
Be sure to record the
new IP address.
Status LEDs
Power LED
The power LED illuminates when the main power switch is turned on. This indicates that there is power to the main (unswitched)
outlets and to the web server.
Outlets ON LED
The Outlets ON LED is off when all outlets are switched off and none of them is going to be switched on during delayed
sequence. The LED blinks once for each outlet switched on according to the following graph:
__ __ __ __ __ __ __ __ _ __ __ __ __ __ __ __ __ _
|__|__|__|__|__|__|__|__|_| |_|__|__|__|__|__|__|__|__|_| | ...
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
---time--->
Remote Access LED
The Remote Access LED lights when a non-expired login session exists. The light goes out after all users log out or after
30 minutes of inactivity. This LED also blinks to display any network activity.
